Hard Drive Degausser - The SATA PATA Hammer

Please call for pricing (800) 468-6888. You can also fill in the Information Request Form here

SATA PATA Drive Data Eraser Degausser Firmware Based Security Erase Solution Doesn't Destroy the Hard Drive - The hand held Hammer™ enables the firmware-based Secure Erase command, which immediately locks down any drive connected to the device. The Hammer is capable of purging digital data on up to 4 harddrives simultaneously at speeds up to 4GB / minute - without destroying the drive.

NIST 800-88 / NIST 800-36 compliant
Harddrives may be reused - promoting better eco-stewardship
Verifies data has been removed
Generates a stored or printed audit trail
Link with USB hubs to manage dozens of drives
Wipes and clones drives in a single operation
Portable, stand alone device delivers additional functionality when used with the CPR Toolbox software application (included).

Audit Trail

Maintaining rigorous records for data 'cleaning' or 'purging' is essential. The Hammer™ is equipped with non-volatile RAM (NVRAM) on board, which tracks device activity. This data can then be transferred to a host PC through the USB 2.0 port. Audit trails can be printed or stored.

Regulatory Compliance:

The Hammer™ meets or exceeds data elimination requirements of:

NIST 800-88 'Purge' and 'Clean'
HIPAA (Health Insurance Portability and Accountability Act)
Patriot Act of 2002
Gramm-Leach-Bliley Act (GLBA)
Various state laws

Support for Non-Secure Erase Enabled Drives
In the event an attached drive does not support the Secure Erase command, data will be completely overwritten by automatically calling the embedded version of CPR Tools' award winning BangDisk™ utility. This ensures compliance with NIST 800-88 and 800-36 guidelines for data 'purging'.

NIST Ranks Firmware-based Secure Erase at the Highest Security Level For Data Sanitization Methods that Don't Require Physical Destruction™

As the emphasis on data security grows, more and more companies are developing hard drive decommissioning protocols that emphasize both security and environmental responsibility.

Compare Hammer / Secure Erase with Software Overwrite Methods.

With processing speeds up to 4Gb minute, the Hammer blows away software overwrite products, which may take hours or days.
Software overwrites consume significantly more energy, with corresponding electric bills.
The Hammer is a portable, hand-held device that can be deployed anywhere, while software overwriting requires a PC and software installation.
Not usable if the hard drive is damaged or is not writeable.
Not all overwriting tools are able to erase data on the locked/hidden sectors thus compromising data security.
Most overwriting tools do not provide detailed reporting of the erasure process therefore providing no audit trail.

Compare Hammer / Secure Erase with Degaussing.

The Hammer is a green solution that allows the hard drive to be redeployed or recycled, while degaussing renders the drive permanently unusable.
While the Hammer offers several means of verification and certification, degaussing can't provide verification of the destruction process as required for regulatory compliance.
Degaussing machines are large, costly and may damage nearby equipment; the Hammer is hand-held, portable and reasonably priced.
Degaussing usually involves a third-party vendor and may compromise care, custody and control protcol; the Hammer is a portable device that can generate a certification of destruction on-site.

Specifications:
Drive Interfaces	Parallel ATA (PATA)
	Serial ATA (SATA)
Host Interface	USB 2.0
Max Transfer Rate	Up to 4.0 GB / Min
Input Voltage	+12 VDC
Max input current	3.5A
Voltage to drive	+12VDC, 5+VDC
Device Addressing Support	28 bit & 48 bit supported
Max Transfer Mode	UDMA mode 4
Supported Devices	ATA 4 through ATA 7
Dimensions	4.15" L x 4.16" W x 1.41" H
Approx Weight	11 oz.

Download a PDF version of this information.